LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (On-Board Diagnostic - Dynamic Stability Control (DSC)) >> On-Board Diagnosis Dynamic Stability Control (DSC) >> PID/Data Monitor and Record Procedure >> Snapshot Data Access Procedure

Snapshot Data Access Procedure

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS (IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    1. Select "Self Test".
    2. Select "Modules".
    3. Select "ABS".
  3. Then, select the "Retrieve CMDTCs" and perform procedures according to directions on the IDS screen.
  4. Retrieve the snapshot data according to the directions on the IDS screen.
NOTE:
  • Snapshot data appears at the top of the help screen when the displayed DTC is selected.
  • The snapshot data stores the currently detected DTC data.
scientia non olet · About LEMON Manuals