DTC C1031-35; Tire Pressure Monitoring System (TPMS) Set Switch: Notes

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

DETECTION CONDITION & POSSIBLE CAUSE

DTC	C1031:35	Tire pressure monitoring system (TPMS) set switch
DETECTION CONDITION		Continuous ON signal from the TPMS set switch for 60 s or more is detected.
FAIL-SAFE FUNCTION		Tire pressure monitoring system warning light illuminates after flashes. Inhibits the TPMS control.
POSSIBLE CAUSE		The driver pressed and held the TPMS set switch for 60 s or more. TPMS set switch malfunction
SYSTEM WIRING DIAGRAM		Not applicable