LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (On-Board Diagnostic - Steering) >> Electric Power Steering (EPS) On-Board Diagnosis >> Snapshot Data Access Procedure

Snapshot Data Access Procedure

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS (IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    1. Select "Self Test".
    2. Select "Modules".
    3. Select "EPS".
  3. Then, select the "Retrieve CMDTCs" and perform procedures according to directions on the IDS screen.
  4. Retrieve the freeze frame PID data according to the directions on the IDS screen.
    NOTE:
    • Snapshot data appears at the top of the help screen when the displayed DTC is selected.
    • Snapshot data stores the currently detected DTC data.
scientia non olet · About LEMON Manuals