LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (On-Board Diagnostic - Steering) >> DTC U3000-16; U3000-1C; U3000-28; U3000-41; U3000-46; U3000-47; U3000-49; U3000-61; U3000-73; U3000-96; EPS Cm Control Module Malfunction >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE

Step Inspection Action
1 VERIFY DTC Yes Replace the EPS CM.
(See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION .)
No Go to the next step.
2 VERIFY THAT NO OTHER DTCs ARE PRESENT Yes Go to the applicable DTC inspection.
(See ELECTRIC POWER STEERING (EPS) ON-BOARD DIAGNOSIS .)
No DTC troubleshooting completed.