LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (On-Board Diagnostic - Engine Control (2 Of 5)) >> DTC P0015; Pcm >> Repeatability Verification Procedure

Repeatability Verification Procedure

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Warm up the engine to allow the engine coolant temperature to reach 80 °C {176 °F} or more.
  2. Shift to 2nd gear and rapidly accelerate the vehicle to 50 km/h {31 mph}(to operate hydraulic variable valve timing control).
  3. Decelerate to idling.
  4. Shift to 2nd gear and rapidly accelerate the vehicle to 50 km/h {31 mph}again.
scientia non olet · About LEMON Manuals