Dual-mass flywheel removal note (SKYACTIV-G 2.5)

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Lock the dual-mass flywheel against rotation using the SST (49 E011 1A0).

Fig 1: Locking Dual-Mass Flywheel Against Rotation Using SST (49 E011 1A0)
Courtesy of MAZDA MOTORS CORP.
Loosen the lock bolts uniformly and gradually in the order shown in the figure, and remove them.

Fig 2: Flywheel Lock Bolts Loosening Sequence
Courtesy of MAZDA MOTORS CORP.
Remove the dual-mass flywheel.
Inspect for oil leakage from the crankshaft rear oil seal.
- If there is any malfunction, replace the crankshaft rear oil seal. (See REAR OIL SEAL REPLACEMENT .)