DTC B13D3-97; Remote Transmitter Registration Work Not Completed: Notes

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

DETECTION CONDITION & POSSIBLE CAUSE

Description	Remote transmitter registration work not completed
Detection condition	Start stop unit detects that the registration of a remote transmitter has not been completed.
Fail-safe	Not applicable
Possible cause	Immobilizer system related DTCs are stored. Remote transmitter registration not completed correctly. Start stop unit configuration error Start stop unit malfunction
System wiring diagram	Not applicable