U.S.A. and Puerto Rico
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
Using M-MDS
- Connect the M-MDS (IDS) to DLC-2.
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- Select the "Powertrain"
- Select the "Engine Oil Maintenance Monitor"
- Select "Remaining oil life" from the M-MDS screen.
Using center display
- Switch the ignition ON (engine off or on).
- Select [Applications] on the center display.
- Select [Oil Change] on the center display.
- Select the following items and change the setting.
| Display of center display | Function | Initial setting | Setting contents | Control unit | ||
|---|---|---|---|---|---|---|
| Oil Life(1) | Oil life to oil inspection/replacement can be displayed. | 100% | - | Connectivity master unit (CMU) | ||
| Reset | Maintenance monitor setting can be reset to the initial value. | Back | Back/Reset | Connectivity master unit (CMU) | ||
|
||||||