Details On DTCs

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

DETECTION CONDITION & POSSIBLE CAUSE

DESCRIPTION	Current sensor: Function malfunction
DETECTION CONDITION	Determination conditions	Error signal from the current sensor is received.
	Preconditions	Not applicable
	Malfunction determination period	5 s period
	Drive cycle	2
	Self test type	CMDTC self test
	Sensor used	Current sensor
FAIL-SAFE FUNCTION	Inhibits the i-ELOOP control.
VEHICLE STATUS WHEN DTCs ARE OUTPUT	Illuminates master warning light A warning message is displayed in the display. Illuminates charging system warning light. The engine cannot be started or the engine may stall due to battery voltage decrease.
POSSIBLE CAUSE	Connector or terminal malfunction of the following parts: Current sensor Front body control module (FBCM) PCM Short to ground or open circuit in current sensor power supply circuit Short to ground in wiring harness between battery positive terminal and current sensor terminal A MAIN 200 A fuse and/or ENG+B 7.5 A fuse malfunction Open circuit in wiring harness between battery positive terminal and current sensor terminal A Short to ground in wiring harness between the following terminals: Current sensor terminal B-Front body control module (FBCM) terminal 2E Front body control module (FBCM) terminal 2R-PCM terminal 2AK Front body control module (FBCM) terminal 2L-PCM terminal 2AL Short to power supply in wiring harness between the following terminals: Battery positive terminal-Current sensor terminal A Current sensor terminal B-Front body control module (FBCM) terminal 2E Front body control module (FBCM) terminal 2R-PCM terminal 2AK Front body control module (FBCM) terminal 2L-PCM terminal 2AL Open circuit in wiring harness between the following terminals: Current sensor terminal B-Front body control module (FBCM) terminal 2E Front body control module (FBCM) terminal 2R-PCM terminal 2AK Front body control module (FBCM) terminal 2L-PCM terminal 2AL Current sensor malfunction Front body control module (FBCM) malfunction PCM malfunction