DTC P117A-00; Engine Oil Temperature Is High: Notes
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DETECTION CONDITION & POSSIBLE CAUSE
| DTC P117A:00 |
Engine oil temperature is high |
| DETECTION CONDITION |
- Any one of the following conditions is met:
- With the transmission in 5th gear or lower gear, an engine speed of 6, 100 rpm (SKYACTIV-G 2.0)/5, 800 rpm (SKYACTIV-G 2.5) or more continues for 6 min.
- The estimated engine oil temperature exceeds 140 °C {284 °F} continues for 6 min (with active air shutter).
Diagnostic support note
- This is a continuous monitor (other).
- The check engine light does not illuminate.
- FREEZE FRAME DATA (Mode 2) is not available.
- Snapshot data is available.
- DTC is stored in the PCM memory.
|
| FAIL-SAFE FUNCTION |
|
| POSSIBLE CAUSE |
- High engine speed condition continues
- Active air shutter close malfunction (with active air shutter)
- PCM malfunction
|