Cooling Fan Removal Note [World manufacturer identification "JM1"]

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

When removing, do not apply excessive force to the clip to prevent damaging the clip.

Using a flathead screwdriver wrapped in a rag, slide the clip in the direction of the arrow shown in the figure and remove the clip.

Fig 1: Sliding Clip Using Flathead Screwdriver Wrapped Rag
Courtesy of MAZDA MOTORS CORP.
Remove the washer.
Remove the cooling fan.