LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Entertainment System) >> Commander Switch Removal/Installation >> Without Electric Parking Brake

Without Electric Parking Brake

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the upper panel. (See UPPER PANEL REMOVAL .) (See UPPER PANEL INSTALLATION .)
  3. Remove the screws.
    Fig 1: Locating Screw On Commander Switch
    G11448773Courtesy of MAZDA MOTORS CORP.
  4. Remove the commander switch.
  5. Install in the reverse order of removal.