LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Entertainment System) >> Auxiliary Jack/USB Port Inspection >> Auxiliary Jack Inspection >> Rear

Auxiliary Jack Inspection: Rear

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the console-up. (See REAR CONSOLE REMOVAL/INSTALLATION .)
  3. Remove the Auxiliary jack/USB port. (See AUXILIARY JACK/USB PORT REMOVAL/INSTALLATION .)
  4. Connect a commercially-available plug to the auxiliary jack/USB port.
    Fig 1: Connecting Commercial Plug To Auxiliary Jack/USB Port
    G11448736Courtesy of MAZDA MOTORS CORP.
  5. Verify that the continuity between the auxiliary jack/USB port terminals is as indicated in the table.
    Fig 2: Auxiliary Jack/USB Port Terminals Continuity Chart
    G09077748Courtesy of MAZDA MOTORS CORP.
    • If not as indicated in the table, replace the auxiliary jack/USB port.
scientia non olet · About LEMON Manuals