LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Interior Trim) >> Console Lid Removal/Installation >> Console Lid Component Removal/Installation >> With electric parking brake

With electric parking brake

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull the console panel in the direction of the arrow in the order of (1), (2) and remove the clips.
    Fig 1: Pulling Console Panel - With Electric Parking Brake
    G11449199Courtesy of MAZDA MOTORS CORP.
  2. Remove the console panel from the rear console.
  3. Remove the pins in the direction of the arrows shown in the figure.
    Fig 2: Removing Console Panel From Rear Console
    G11449200Courtesy of MAZDA MOTORS CORP.
  4. Remove the console lid from the rear console.
  5. Install in the reverse order of removal.