Warning/Indicator Light Illumination Inspection
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the M-MDS to the DLC-2.
- After vehicle identification, select the following from the M-MDS initialization screen.
- "Data logger"
- "Module"
- "IC"
- Using the simulation function WL+IL, verify that the warning/indicator lights in the following table are illuminated.
- If any of the warning/indicator lights are not displayed, replace the instrument cluster. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .)