LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Conventional Brake System) >> Vacuum Pump Removal/Installation >> Vacuum Pump and O-ring Installation Note

Vacuum Pump and O-ring Installation Note

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Rotate the vacuum pump by hand to drain the remainder of the engine oil in the vacuum pump.
  2. Degrease the O-ring installation groove and installation surface.
  3. Install the new O-ring to the vacuum pump.
  4. Install the vacuum pump.
scientia non olet · About LEMON Manuals