Pedal Height Inspection
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the distance from the center of the upper surface of the pedal pad to the floor covering and verily that it is as specified.
- If not within the specification, inspect the following items and repair or replace the applicable part if there is any malfunction.
- Power brake unit installation condition
- Deformation of or damage to the power brake unit fork
- Brake pedal installation condition
- Clevis pin wear
Brake pedal height (reference value)
136 mm {5.35 in}
- If there is no malfunction in the above items, replace the brake pedal. (See BRAKE PEDAL REMOVAL/INSTALLATION .)