DTC U2101-00: U2300-52: U2300-54: U2300-55: U2300-56: U2300-64: Configuration Data Not Recorded: Notes

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

DTC	U2101:00, U2300:52, U2300:54, U2300:55, U2300:56, U2300:64		Configuration data not recorded
DETECTION CONDITION		DSC Control Module detects configuration data not record or data error
FAIL-SAFE FUNCTION		Refer to "DTC TABLE " and "Fail-safe Function Malfunction Contents". (See ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)] .)
POSSIBLE CAUSE		Module configuration procedure is not done properly Correct data cannot be received from instrument cluster Another vehicles control modules been installed
SYSTEM WIRING DIAGRAM		-