DTC P0942-46: P0942-49: DSC Unit Mismatched Installation: Notes

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

DTC	P0942:46, P0942:49		DSC unit mismatched installation
DETECTION CONDITION		No match between DSC Control Module ID and DSC HU ID detected
FAIL-SAFE FUNCTION		Refer to "DTC TABLE " and "Fail-safe Function Malfunction Contents". (See ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)] .)
POSSIBLE CAUSE		DSC Control Module ID and DSC HU ID do not match (DSC HU/Control Module internal malfunction)
SYSTEM WIRING DIAGRAM		-