DTC C0061-28: C0061-64: C0062-28: C0062-64: C0063-28: C0063-64: SAS Control Module System: Notes

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

DTC	C0061:28, C0061:64, C0062:28, C0062:64, C0063:28, C0063:64		SAS control module system
DETECTION CONDITION		NOTE: The low-G sensor and the yaw rate sensor are built into the SAS control module. C0061:28, C0061:64 Out-of-specification signal modulation or lateral-G value is detected from the low-G sensor. C0062:28, C0062:64 Out-of-specification signal modulation or longitudinal-G value is detected from the low-G sensor. C0063:28, C0063:64 Out-of-specification signal modulation or yaw rate value is detected from the yaw rate sensor.
FAIL-SAFE FUNCTION		Refer to "DTC TABLE " and "Fail-safe Function Malfunction Contents". (See ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)] .)
POSSIBLE CAUSE		SAS control module malfunction DSC HU/Control Module malfunction Poor connection at connectors (female terminal)
SYSTEM WIRING DIAGRAM		-