LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (On-Board Diagnostics [Dynamic Stability Control]) >> DTC C0001-01: C0002-01: C0003-01: C0004-01: C0010-01: C0011-01: C0014-01: C0015-01: C0018-01: C0019-01: C001C-01: C001D-01: Solenoid Valve System >> Notes

DTC C0001-01: C0002-01: C0003-01: C0004-01: C0010-01: C0011-01: C0014-01: C0015-01: C0018-01: C0019-01: C001C-01: C001D-01: Solenoid Valve System: Notes

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
DTC C0001:01, C0002:01 Traction control solenoid valve system
C0003:01, C0004:01 Stability control solenoid valve system
C0010:01 LF inlet solenoid valve system
C0011:01 LF outlet solenoid valve system
C0014:01 RF inlet solenoid valve system
C0015:01 RF outlet solenoid valve system
C0018:01 LR inlet solenoid valve system
C0019:01 LR outlet solenoid valve system
C001C:01 RR inlet solenoid valve system
C001D:01 RR outlet solenoid valve system
DETECTION CONDITION 
  • Malfunction detected in the DSC HU/Control Module solenoid valve or internal circuit by the DSC HU/Control Module on-board diagnostic function
FAIL-SAFE FUNCTION  Refer to "DTC TABLE " and "Fail-safe Function Malfunction Contents". (See ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)] .)
POSSIBLE CAUSE 
  • Open or short circuit in the DSC HU/Control Module internal solenoid valves
  • Solenoid valve malfunction
SYSTEM WIRING DIAGRAM  -