DTC C0061-29; C0062-29; C0063-29; P0666-29; Low-G, Yaw Rate, And Temperature Sensors In SAS Control Module Disabled: Notes

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

DTC C0061:29/C0062:29/C0063:29/P0666:29 SAS CONTROL MODULE STANDARD DEPLOYMENT CONTROL SYSTEM - DETECTION CONDITION & POSSIBLE CAUSE

System malfunction location	C0061:29: Low-G sensor (lateral-G) in SAS control module (internal circuit disabled) C0062:29: Low-G sensor (forward-G) in SAS control module (internal circuit disabled) C0063:29: Yaw rate sensor in SAS control module (internal circuit disabled) P0666:29: Temperature sensor in SAS control module (internal circuit disabled)
Detection condition	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. SAS control module internal sensor has a malfunction
Fail-safe	Not applicable
Possible cause	SAS control module malfunction
System wiring diagram	Not applicable