DTC B10FE-11; B10FE-13; B10FE-87; B10FE-96; Passenger-Side Side Air Bag Sensor Circuit Malfunction: Notes

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

DETECTION CONDITION & POSSIBLE CAUSES

System malfunction location	B10FE:11: Passenger-side side air bag sensor circuit short to body ground or power supply B10FE:13: Passenger-side side air bag sensor circuit open circuit or resistance high B10FE:87: Signal reception error from passenger-side side air bag sensor B10FE:96: Passenger-side side air bag sensor internal malfunction
Detection condition	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. Wiring harness between the passenger-side side air bag sensor and SAS control module has a malfunction Passenger-side side air bag sensor has a malfunction
Fail-safe	Not applicable
Possible cause	Passenger-side side air bag sensor connector malfunction Open circuit in the wiring harness between the following terminals: SAS control module terminal 1P-passenger-side side air bag sensor terminal A SAS control module terminal 1Q-passenger-side side air bag sensor terminal B Short circuit to body ground in the wiring harness between the following terminals: SAS control module terminal 1P-passenger-side side air bag sensor terminal A SAS control module terminal 1Q-passenger-side side air bag sensor terminal B Short circuit to power supply in the wiring harness between the following terminals: SAS control module terminal 1P-passenger-side side air bag sensor terminal A SAS control module terminal 1Q-passenger-side side air bag sensor terminal B Passenger-side side air bag sensor malfunction SAS control module malfunction