DTC B00D2-29; Communication Error With Instrument Cluster (Air Bag System Warning Light Status Mis-Matched): Notes
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DETECTION CONDITION & POSSIBLE CAUSES
| System malfunction location |
- Communication error with instrument cluster (air bag system warning light status mis-matched)
|
| Detection condition |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Air bag system warning light illumination request sent from SAS control module does not correspond to air bag system warning light illumination status in instrument cluster
|
| Fail-safe |
Not applicable |
| Possible cause |
- Instrument cluster assembly incorrect
- Instrument cluster malfunction
- SAS control module malfunction
|
| System wiring diagram |
Not applicable |