Diagnostic Procedure
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE
| Step | Inspection | Action | |
|---|---|---|---|
| 1 | VERIFY REAR BODY CONTROL MODULE (RBCM) DTCs AGAIN
|
Yes | Go to the next step. |
| No | Go to Step 7. | ||
| 2 | VERIFY INSTRUMENT CLUSTER DTCs
|
Yes | Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [INSTRUMENT CLUSTER] .) |
| No | Go to the next step. | ||
| 3 | VERIFY FRONT BODY CONTROL MODULE (FBCM) DTCs
|
Yes | Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [FRONT BODY CONTROL MODULE (FBCM)] .) |
| No | Go to the next step. | ||
| 4 | VERIFY IF MALFUNCTIONING LOCATION IS INSTRUMENT CLUSTER DEPENDING ON REPEATABILITY
|
Yes | Replace the instrument cluster, then go to the next step. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .) |
| No | Go to Step 7. | ||
| 5 | VERIFY IF MALFUNCTIONING LOCATION IS FRONT BODY CONTROL MODULE (FBCM) DEPENDING ON REPEATABILITY
|
Yes | Replace the front body control module (FBCM), then go to the next step. (See FRONT BODY CONTROL MODULE (FBCM) REMOVAL/INSTALLATION .) |
| No | Go to Step 7. | ||
| 6 | VERIFY THAT REPAIRS HAVE BEEN COMPLETED
|
Yes | Replace the rear body control module (RBCM), then go to the next step. (See REAR BODY CONTROL MODULE (RBCM) REMOVAL/INSTALLATION .) |
| No | Go to the next step. | ||
| 7 | VERIFY IF OTHER DTCs DISPLAYED
|
Yes | Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [REAR BODY CONTROL MODULE (RBCM)] .) |
| No | DTC troubleshooting completed. | ||