Residual Unbalance Amount Verification
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- After installing the balance weights on the outer and inner sides, measure the wheel balance again.
RESIDUAL UNBALANCE AMOUNT VERIFICATION
| Outer side (affixing type) | Inner side (clip type) | |
|---|---|---|
| 16 inch wheel | 14 g {0.49 oz} | 9.0 g {0.32 oz} |
| 18 inch wheel | 12 g {0.42 oz} | 8.0 g {0.28 oz} |
- If not within the specification, adjust the wheel balance again.