| DESCRIPTION |
HO2S circuit high input |
| DETECTION CONDITION |
Determination conditions |
- A condition in which the HO2S input voltage exceeds the specified value continues for the specified period.
|
| Preconditions |
|
| Malfunction determination period |
|
| Drive cycle |
|
| Self test type |
- CMDTC self test, KOEO self test, KOER self test
|
| Sensor used |
|
| FAIL-SAFE FUNCTION |
|
| VEHICLE STATUS WHEN DTCs ARE OUTPUT |
- Illuminates check engine light.
|
| POSSIBLE CAUSE |
- HO2S connector or terminals malfunction
- PCM connector or terminals malfunction
- Short to power supply in wiring harness between the following terminals:
- HO2S terminal A-PCM terminal 2AI
- HO2S terminal B-PCM terminal 2AG
- HO2S malfunction
- PCM malfunction
|