LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Engine Starting System >> Starter Inspection >> Starter Inner Parts Inspection >> Magnetic switch

Magnetic switch

  1. Inspect for continuity between terminals S and M using a tester.
    Fig 1: Checking Continuity Between Terminals S And M Using Tester
    G09074521Courtesy of MAZDA MOTORS CORP.
    • If there is no continuity, replace the magnetic switch.
  2. Inspect for continuity between terminal S and the body using a tester.
    Fig 2: Checking Continuity Between Terminals S And Body Using Tester
    G09074522Courtesy of MAZDA MOTORS CORP.
    • If there is no continuity, replace the magnetic switch.
  3. Verify that there is no continuity between terminals M and B using a tester.
    Fig 3: Checking Continuity Between Terminals M And B Using Tester
    G09074523Courtesy of MAZDA MOTORS CORP.
    • If there is continuity, replace the magnetic switch.
scientia non olet · About LEMON Manuals