LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Thermostat Removal/Installation >> Thermostat Cover Removal Note

Thermostat Cover Removal Note

  1. Place rags on the transaxle case around the area under the thermostat cover.
  2. Slightly loosen the three thermostat cover bolts and use the rags to absorb the draining engine coolant.
    CAUTION:
    • Do not remove the thermostat cover completely at this time because the engine coolant remaining in the engine will drain out.
  3. After the engine coolant stops draining, remove the thermostat cover.
scientia non olet · About LEMON Manuals