LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Wheel Hubs - Rear >> Wheel Hub Component Removal/Installation (AWD) >> Locknut Removal Note

Locknut Removal Note

  1. Remove the locknut.
  2. Install a spare nut onto the drive shaft.
  3. Tap the nut with a copper hammer and separate the drive shaft from the axle.
Fig 1: Tapping Nut With Copper Hammer
G11427266Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals