LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Wheel Hubs - Rear >> Wheel Hub Component Removal/Installation (AWD) >> Hub Support Bushing (Rear) Installation Note

Hub Support Bushing (Rear) Installation Note

  1. Align the projection of the bushing with the hub support marking and set a new bushing to the hub support.
    Fig 1: Aligning Projection Of Bushing With Hub Support Marking
    G09785715Courtesy of MAZDA MOTORS CORP.
  2. Install a new hub support bushing (rear) using the SSTs.
Fig 2: Installing Hub Support Bushing (Rear) Using SST
G09785716Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals