LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Wheel Hubs & Steering Knuckle - Front >> Wheel Hub, Steering Knuckle Removal/Installation >> Locknut Removal Note

Locknut Removal Note

  1. Remove the locknut.
  2. Install a spare nut onto the drive shaft.
  3. Tap the nut with a copper hammer and separate the drive shaft from the axle.
    Fig 1: Tapping Nut With Copper Hammer
    G11427216Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals