LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Drive Axle Shaft >> Front Drive Shaft (Tripod Joint) Disassembly/Assembly >> Boot (Wheel Side) Disassembly Note

Boot (Wheel Side) Disassembly Note

  1. Wrap vinyl tape around the spline area of the shaft to prevent damage to the boot.
    Fig 1: Wrapping Vinyl Tape Around Spline Area Of Shaft
    G09759018Courtesy of MAZDA MOTORS CORP.
  2. Remove the boot (wheel side).
  3. Wipe off grease on the boot (wheel side) and ball joint using a clean rag.
scientia non olet · About LEMON Manuals