LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Drive Axle Shaft >> Front Drive Shaft (Tripod Joint) Disassembly/Assembly >> Boot (Transaxle Side) Disassembly Note

Boot (Transaxle Side) Disassembly Note

  1. Wrap vinyl tape around the spline area of the shaft to prevent damage to the boot.
    Fig 1: Wrapping Vinyl Tape Around Spline Area Of Shaft
    G09759018Courtesy of MAZDA MOTORS CORP.
  2. Remove the boot (transaxle side).
  3. Wipe off grease on the boot (transaxle side) using a clean rag.