DTC U2101-00; U2300-52; U2300-54; U2300-55; U2300-56; U2300-64; Configuration Data Not Recorded: Notes

DETECTION CONDITION & POSSIBLE CAUSE

DTC	U2101:00, U2300:52, U2300:54, U2300:55, U2300:56, U2300:64	Configuration data not recorded
DETECTION CONDITION		DSC CM detects configuration data not record or data error
FAIL-SAFE FUNCTION		Refer to "DTC Table" and "Fail-safe Function Malfunction Contents". (See DTC TABLE [DYNAMIC STABILITY CONTROL (DSC)] .)
POSSIBLE CAUSE		Module configuration procedure is not done properly Correct data cannot be received from instrument cluster Another vehicles control modules been installed
SYSTEM WIRING DIAGRAM		-