DTC C0061-54; C0062-54; C0063-54; DSC HU/Cm System (Unperformed Initialization Procedures): Notes
DETECTION CONDITION & POSSIBLE CAUSE
| DTC |
C0061:54, C0062:54, C0063:54 |
DSC HU/CM system (unperformed initialization procedure) |
| DETECTION CONDITION |
- C0061:54
- DSC HU/CM detects that the initialization procedure has not been performed. (Lateral acceleration sensor)
- C0062:54
- DSC HU/CM detects that the initialization procedure has not been performed. (Longitudinal acceleration sensor)
- C0063:54
- DSC HU/CM detects that the initialization procedure has not been performed. (Yaw rate sensor)
|
| FAIL-SAFE FUNCTION |
Refer to "DTC Table" and "Fail-safe Function Malfunction Contents".
(See DTC TABLE [DYNAMIC STABILITY CONTROL (DSC)] .) |
| POSSIBLE CAUSE |
- Initialization procedure for the lateral acceleration sensor, longitudinal acceleration sensor or yaw rate sensor not performed
- SAS control module malfunction
- DSC HU/CM malfunction
|
| SYSTEM WIRING DIAGRAM |
- |