DTC C0061-28; C0061-64; C0062-28; C0062-64; C0063-28; C0063-64; SAS Control Module Systems: Notes

DETECTION CONDITION & POSSIBLE CAUSE

DTC	C0061:28, C0061:64, C0062:28, C0062:64, C0063:28, C0063:64	SAS control module system
DETECTION CONDITION		NOTE: The low-G sensor and the yaw rate sensor are built into the SAS control module. C0061:28, C0061:64 Out-of-specification signal modulation or lateral-G value is detected from the low-G sensor. C0062:28, C0062:64 Out-of-specification signal modulation or longitudinal-G value is detected from the low-G sensor. C0063:28, C0063:64 Out-of-specification signal modulation or yaw rate value is detected from the yaw rate sensor.
FAIL-SAFE FUNCTION		Refer to "DTC Table" and "Fail-safe Function Malfunction Contents". (See DTC TABLE [DYNAMIC STABILITY CONTROL (DSC)] .)
POSSIBLE CAUSE		SAS control module malfunction DSC HU/CM malfunction Poor connection at connectors (female terminal)
SYSTEM WIRING DIAGRAM		-