DTC U2300-55; Instrument Cluster Configuration Not Implemented: Notes
DTC U2300-55; INSTRUMENT CLUSTER CONFIGURATION NOT IMPLEMENTED - DETECTION CONDITION & POSSIBLE CAUSE
| Description |
Instrument cluster configuration not implemented |
| Detection condition |
- Electric parking brake control module received a signal which indicates the instrument cluster configuration is not performed with the ignition switched ON (engine off or on).
|
| Fail-safe |
Not applicable |
| Possible cause |
NOTE:
- To correctly write the configuration data sent from the instrument cluster to the electric parking brake control module to the electric parking brake control module, 30 s or more need to have elapsed since the ignition was switched ON (engine off or on).
- Instrument cluster configuration is not completed.
- Electric parking brake control module malfunction
|
| System wiring diagram |
Not applicable |