LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Conventional Brake System >> Power Brake Unit Inspection >> Using SST >> After-inspection procedure

After-inspection procedure

  1. After the inspection, remove the SSTs, install the brake hose, clamp, and brake pipe to the original positions, and then bleed the air from the brake line. (See FRONT BRAKE HOSE REMOVAL/INSTALLATION .) (See BRAKE FLUID AIR BLEEDING .)
scientia non olet · About LEMON Manuals