LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels >> Bumper Stiffener Lower Removal/Installation

Bumper Stiffener Lower Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the seal board upper. (See SEAL BOARD UPPER REMOVAL/INSTALLATION .)
  3. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION .)
  4. Remove the bolts.
    Fig 1: Removing Bumper Stiffener Lower Bolts
    G11425838Courtesy of MAZDA MOTORS CORP.
  5. Move the bumper stiffener lower in the direction of arrow (1), (2) and remove the hooks.
    Fig 2: Moving Bumper Stiffener Lower
    G11425839Courtesy of MAZDA MOTORS CORP.
  6. Remove the bumper stiffener lower.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals