Security Indicator Light: 13, DTC B13D3-05; P1260-00; Remote Transmitter Program Error: Notes
DTC B13D3-05; P1260-00; REMOTE TRANSMITTER PROGRAM ERROR DIAGNOSTIC PROCEDURE DETECTION
| Description |
Remote transmitter program error |
| Detection condition |
- Start stop unit detects a remote transmitter program error.
|
| Fail-safe |
Not applicable |
| Possible cause |
- Push button start connector or terminal malfunction
- Start stop unit connector or terminal malfunction
- Remote transmitter program error
- Remote transmitter malfunction
- Start stop unit malfunction
NOTE:
- If any of the following items are touching or near the remote transmitter, signal communication between the remote transmitter and the vehicle is negatively affected, resulting in the engine not starting.
- Spare keys
- Keys for other vehicles equipped with an immobilizer system
- Any metallic object
- Any electronic device, or any credit or other card with magnetic strips
- Radio wave outputting device nearby
|
| System wiring diagram |
Not applicable |