Immobilizer System

x: Applicable-: Not applicable

DTC

Push butt on start indicator light(amber)

Description

Fail-safe

Drive cycle

Memory function

Service Information

Start stop unit

PCM

U3000:96

P1260:00

Flash

Start stop unit malfunction

(See SECURITY INDICATOR LIGHT: 09, DTC: U3000:96/P1260:00 [START STOP UNIT] .)

B10D9:87

P1260:00

Flash

Coil antenna (built into push button start) error

(See SECURITY INDICATOR LIGHT: 11, DTC: B10D9:87/P1260:00 [START STOP UNIT] .)

B13D3:05

P1260:00

Remote transmitter program error

(See SECURITY INDICATOR LIGHT: 13, DTC: B13D3:05/P1260:00 [START STOP UNIT] .)

B13D3:94

P1260:00

Communication error with remote transmitter

(See SECURITY INDICATOR LIGHT: 13, DTC: B13D3:94/P1260:00 [START STOP UNIT] .)

B13D3:51

P1260:00

Flash

Unregistered remote transmitter is detected

(See SECURITY INDICATOR LIGHT: 15, DTC: B13D3:51/P1260:00 [START STOP UNIT] .)

U0100:87

P1260:00

Communication error with PCM (no response or data mis-match)

(See SECURITY INDICATOR LIGHT: 16, DTC: U0100:87/P1260:00 [START STOP UNIT] .)

B13D4:00

P1260:00

Insufficient remote transmitter programming number

(See SECURITY INDICATOR LIGHT: 21, DTC: B13D4:00/P1260:00 [START STOP UNIT] .)

B10DA:51

P1260:00

Communication error with PCM (data received failure)

(See SECURITY INDICATOR LIGHT: 22, DTC: B10DA:51/P1260:00 [START STOP UNIT] .)

B10DA:62

P1260:00

Communication error with PCM (code mis-matched)

(See SECURITY INDICATOR LIGHT: 23, DTC: B10DA:62/P1260:00 [START STOP UNIT] .)

⁽¹⁾	The letters at the beginning of each DTC are only displayed when using the M-MDS, and refer to the following: B= Body system, P= Powertrain system, U= Network communication system.

⁽²⁾	Without multi-information display

⁽³⁾	C: CMDTC self test, D: ODDTC self test