DTC P081D-2F;Neutral Switch Signal Mis-Match: Notes
DTC P081D-2F;NEUTRAL SWITCH SIGNAL MIS-MATCH DETECTION CONDITION AND POSSIBLE CAUSES
| Description |
Neutral switch signal mis-match |
| Detection condition |
- Start stop unit detects that the vehicle speed changes from 0 km/h {0 mph} to 10 km/h {6.2 mph} for a 5 times or more even though the neutral signal from the PCM is being received with the ignition switched ON (engine off or on).
|
| Fail-safe |
- Perform the control with neutral switch signal turned off.
|
| Possible cause |
- DTCs are stored in the PCM.
- Neutral switch malfunction
- PCM malfunction
- Start stop unit malfunction
|
| System wiring diagram |
Not applicable |