LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> On-Board Diagnostic - Audio >> Supplier Identification Procedure [Audio Unit] >> Identification with the label

Identification with the label

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
  3. Remove the decoration panel. (See DECORATION PANEL REMOVAL/INSTALLATION .)
  4. Remove the audio unit. (See AUDIO UNIT REMOVAL/INSTALLATION .)
  5. Verify the supplier name by referring to the label attached to the unit.
    Fig 1: Attached Label On Unit
    G11430327Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • The supplier varies depending on the units. When asking the supplier (service center) for repair or replacement, identify the supplier and fill in the Audio Repair Order Form using the following procedures.
scientia non olet · About LEMON Manuals