LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> On-Board Diagnostic - Audio >> Diagnostic Assist Function [Audio Unit] >> LCD inspection

LCD inspection

  1. Switch the ignition to ACC or ON (engine off or on).
  2. Turn the audio unit power on.
  3. While pressing the POWER/VOLUME button, press the TUNE (up)/M button for 0.5 s or more.
    Fig 1: POWER/VOLUME Button And TUNE (UP)/M Button
    G11430303Courtesy of MAZDA MOTORS CORP.
  4. Inspect according to the following table:
    Inspection Display Action
    • Verify the displayed screen.
    • Is the LCD content truncated or faint?
    		 Appended figure Yes Replace the audio unit.
    (See AUDIO UNIT REMOVAL/INSTALLATION .)
    No Display is normal.

    Appended figure

    Fig 2: Screen Display - Audio Unit
    G11430304Courtesy of MAZDA MOTORS CORP.
  5. Switch the audio power supply off or switch the ignition off to end the diagnostic assist function.
scientia non olet · About LEMON Manuals