LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> On-Board Diagnostic - Audio >> Diagnostic Assist Function [Audio Unit] >> Button Inspection

Button Inspection

  1. Switch the ignition to ACC or ON (engine off or on).
  2. Turn the audio unit power on.
  3. While pressing the POWER/VOLUME button, press the PRESET button 3 for 0.5 s or more.
    Fig 1: POWER/VOLUME Button And PRESET Button 3
    G11430305Courtesy of MAZDA MOTORS CORP.
  4. Inspect according to the following table:
    Inspection Display Action
    • Operate all of the switches (press).
    • Does the buzzer sound?
    		 - Yes The switch is normal.
    No Verify the switch.
  5. Switch the audio power supply off or switch the ignition off to end the diagnostic assist function.
scientia non olet · About LEMON Manuals