Diagnostic Procedure

DIAGNOSTIC PROCEDURE

Step	Inspection		Action
1	VERIFY IF MALFUNCTIONING LOCATION IS Bluetooth ® UNIT DEPENDING ON REPEATABILITY Clear the DTC from the Bluetooth ® unit memory. (See CLEARING DTC [AUDIO UNIT] .) Perform the Bluetooth ® unit DTC inspection. (See DTC INSPECTION [AUDIO UNIT] .) Is the same DTC present?	Yes	Replace the Bluetooth ® unit, then go to the next step. (See Bluetooth® UNIT REMOVAL/INSTALLATION .)
1		No	Go to the next step.
2	VERIFY IF OTHER DTCs DISPLAYED Are any other DTCs displayed?	Yes	Repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [AUDIO UNIT] .)
2		No	DTC troubleshooting completed.