LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> On-Board Diagnostic - Audio >> Clearing DTC [Audio Unit] >> For Bluetooth® Unit

For Bluetooth® Unit

  1. DTCs are displayed. (See DTC INSPECTION [AUDIO UNIT] .)
  2. While pressing the AUTO-M button, press the PRESET button 4 for 3 s or more.
    Fig 1: AUTO-M Button And PRESET Button
    G11430302Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • After clearing, "No Err" is displayed.
  3. Switch the ignition off to end the on-board diagnostic test mode.