CMDTC Self Test
- Connect the M-MDS to the DLC-2.
- After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- Select "Self-test"
- Select "All CMDTCs"
- Verify the DTC according to the directions on the screen.
- If a DTC is displayed, repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [AUDIO AMPLIFIER] .)
- After completion of repairs, clear all DTCs stored in the audio amplifier. (See CLEARING DTC [AUDIO AMPLIFIER] .)