LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> On-Board Diagnostic - Active Driving Display System >> DTC U0001-88; U0100-00; U0101-00; U0104-00; U0155-00; U0156-00; U0235-00; U023A-00; U0298-00; Module Communication Errors >> Notes

DTC U0001-88; U0100-00; U0101-00; U0104-00; U0155-00; U0156-00; U0235-00; U023A-00; U0298-00; Module Communication Errors: Notes

DESCRIPTION AND POSSIBLE CAUSES

Description
  • U0001:88
    • Module communication error (HS-CAN)
  • U0100:00
    • Communication error with PCM
  • U0101:00
    • Communication error with TCM
  • U0104:00
    • Communication error with radar unit
  • U0155:00
    • Communication error with instrument cluster
  • U0156:00
    • Communication error with connectivity master unit (CMU)
  • U0235:00
    • Communication error with laser sensor
  • U023A:00
    • Communication error with forward sensing camera (FSC)
  • U0298:00
    • Communication error with DC-DC converter (i-ELOOP)
Detection condition
  • U0001:88
    • Active driving display detects a CAN bus communication line (HS-CAN) malfunction.
  • U0100:00
    • Active driving display cannot receive the CAN signal from the PCM.
  • U0101:00
    • Active driving display cannot receive the CAN signal from the TCM for >1 s or more.
  • U0104:00
    • Active driving display cannot receive the CAN signal from the radar unit for 1 s or more.
  • U0155:00
    • Active driving display cannot receive the CAN signal from the instrument cluster for 5 s or more.
  • U0156:00
    • Active driving display cannot receive the CAN signal from the connectivity master unit (CMU) for 5 s or more.
  • U0235:00
    • Active driving display cannot receive the CAN signal from the laser sensor for 1 s or more.
  • U023A:00
    • Active driving display cannot receive the CAN signal from the forward sensing camera (FSC) for 1 s or more.
  • U0298:00
    • Active driving display cannot receive the CAN signal from the DC-DC converter (i-ELOOP) for 5 s or more.
Fail-safe
  • U0001:88
    • Not applicable
  • U0100:00
    • Not applicable
  • U0104:00
    • Not applicable
  • U0155:00
    • Not applicable
  • U0156:00
    • Not applicable
  • U0235:00
    • Inhibits the smart city brake support control.
      • Warning message related to the smart city brake support is displayed in the center display. (with center display)
  • U023A:00
    • Not applicable
  • U0298:00
    • Not applicable
Possible cause
  • Malfunction in CAN bus communication line
  • Malfunction in CAN line between PCM and active driving display
  • Malfunction in CAN line between TCM and active driving display
  • Malfunction in CAN line between radar unit and active driving display
  • Malfunction in CAN line between connectivity master unit (CMU) and active driving display
  • Malfunction in CAN line between instrument cluster and active driving display
  • Malfunction in CAN line between laser sensor and active driving display
  • Malfunction in CAN line between forward sensing camera (FSC) and active driving display
  • Malfunction in CAN line between DC-DC converter (i-ELOOP) and active driving display
System wiring diagram Not applicable